1. Step 1: Determine the network class of the given IP Address 192.35.
2. Step 2: As the IP starts with 192, the address falls on Class C.
3. Step 3: Calculate Number of bits, to define the subnets.
4. Step 4: Formula to calculate Number of bits = Log2(Number of subnets + 2).

Likewise, can you determine subnet mask from IP? To calculate the subnet mask, convert an IP address to binary, perform the calculation and then convert back to the IPv4 decimal number representation known as a dotted quad. The same subnetting procedure works for IPv6 addresses.

Best answer for this question, how do you calculate subnet mask from hosts and subnets?

Considering this, how do I find my custom subnet mask? Convert Subnet Mask To Dotted Decimal Notation: We take each of the octets in the subnet mask and convert it to decimal. The result is our custom subnet mask in the form we usually see it: 255.255. 255.224. Express Subnet Mask In “Slash Notation”: Alternately, we can express the subnet mask in “slash notation”.To calculate the Network ID of a subnet, take an IP address within the subnet and run the AND operator (on a calculator) on the subnet mask. Using a calculator to find the Network ID is the easy way as you do not have to convert it into binary form. Once the Network ID is found, calculating the Broadcast ID is easy.

## How do you calculate the number of subnets?

Calculate the subnet bits by looking at the final 8-bit binary word of the 32-bit binary subnet mask. If the final 8-bit binary word is 10000000, then there is one subnet bit and therefore 25 mask bits. If it is 11000000, then there are two subnet bits and therefore 26 mask bits.

## What are the 3 classes of subnet mask?

1. Class A: 255.0. 0.0.
2. Class B: 255.255. 0.0.
3. Class C: 255.255. 255.0.

## How many subnet mask are there?

Introduction to Networking In IPv4 there are three default subnet masks corresponding to the three classes of IP addresses (as illustrated earlier). There are currently three ways of showing the subnet masks for IPv4 addresses; you can show them in dotted decimal, binary, or classless interdomain routing (CIDR).

## What is the default subnet mask of Class C IPv4 IP address?

The default subnet mask for Class C is 255.255. 255.

## What is the subnet mask for a Class C IP address?

Class C networks use a default subnet mask of 255.255. 255.0 and have 192-223 as their first octet. The address 192.168. 123.132 is a class C address.

## Is subnet ID and subnet mask same?

The subnet mechanism uses a portion of the Host ID field to identify individual subnets. Figure 2, for example, shows the third group of the 172.16. 0.0 network being used as a Subnet ID. A subnet mask is used to identify the part of the address that should be used as the Subnet ID.

## What is subnet mask example?

Example: A class C network would have a subnet mask of 255.255. 255.0 which means that 24 bits are used for the network. In CIDR notation this is designated by a /24 following the IP address.

## Is 255.255 255.255 IP address valid?

255.255. 255.255 represents the local broadcast address, which is only propagated within the network. This broadcast data cannot cross routers by default. That is, it is a restricted broadcast address.

## How do you subnet a Class B IP address?

1. 1st Subnet = 172.16. 0.0/24.
2. 2nd Subnet = 172.16. 1.0/24.
3. 3rd Subnet = 172.16. 2.0/24.
4. 4th Subnet = 172.16. 3.0/24.
5. 255th Subnet=172.16. 254.0/24.
6. 256th Subnet=172.16. 255.0/24.

## What is 28 subnet mask?

/28 — 16 Subnets — 14 Hosts/Subnet. Network # IP Range. Broadcast. .0.

– A subnet mask allows identification of host part and network part of an IP address. – Subnet mask can be used to find if an IP address is present on a subnet or not. – Subnet mask is utilized for isolating the network id and host ids. – This is to reduce the broadcast domain or to reduce heavy network traffic.

## What does a subnet mask of 255.255 255.0 mean?

A subnet mask of 255.255. 255.0 allows for close to 256 unique hosts within the network (since not all 256 IP addresses can be used). If your computer is connected to a network, you can view the network’s subnet mask number in the Network control panel (Windows) or System Preference (macOS).

## What is 24 subnet mask?

24 indicates that the first 24 bits of the address are masked (255.255.255.0). a /16 would translate into 255.255.0.0. Here is some more information you can refer to: Guide | Introduction to IP Addressing. Guide | CIDR and Subnetting.