Which of the following is an invalid ip address,prefix to assign to a host?

Mask 255.255. 255.0 has 16 bits for the subnet and 8 bits of the host. 2. – You have been allocated a class B network address of 135.1.

As many you asked, which IP address is a Class C address? Class C networks use a default subnet mask of 255.255. 255.0 and have 192-223 as their first octet. The address 192.168. 123.132 is a class C address.

Considering this, which subnet mask should you use if you want 8 bits of host address space? We can only use the first 8 bits for out subnets as these 8 bits have been allocated as host addresses. So Subnet masks of 255.255. 255.224 and 255.255. 255.240 would both work.

Frequent question, which of the following is an invalid IP address? Reserved Addresses 0.0″ and “255.255. 255.255.” Another number, “127.0. 0.1” is called the “localhost;” every computer on a network refers to itself as this address. Because these numbers have special meanings, the network does not assign them to PCs; such addresses would be invalid.

See also  How to locate someones ip address?

Also, what are the 4 parts of an IP address?

  1. Address Class. Early in the development of IP, the IANA (Internet Assigned Numbers Authority) designated five classes of IP address: A, B, C, D, and E.
  2. Default Subnet Mask.
  3. The Network Field.
  4. The Host Field.
  5. Non-default Masks.
  6. The Subnet Field.

What is subnet mask for IP address?

A subnet mask is a 32- or 128-bit number that segments an existing IP address in a TCP/IP network. It is used by the TCP/IP protocol to determine whether a host is on the local subnet or on a remote network.

Which address class does not need subnet mask?

0.0 to 255.255. 255.255. Just like our Class D multicast addresses, these addresses do not have a default subnet mask.

Which is a valid IP address?

A valid IP address must be in the form of A.B.C.D, where A,B,C and D are numbers from 0-255. The numbers cannot be 0 prefixed unless they are 0.

What is a Class D IP address?

Class D addresses are used for multicasting applications. Unlike the previous classes, the Class D is not used for “normal” networking operations. … Class D addresses are 32-bit network addresses, meaning that all the values within the range of 224.0. 0.0 – 239.255. 255.255 are used to uniquely identify multicast groups.

What class does the IP address 10.0 0.0 8 belong?

The 10.0. 0.0/8 private network is a class A network ID that allows the following range of valid IP addresses: 10.0.

What is the purpose of a subnet mask in an IP address and mask combination?

See also  You asked: How do I find the IP address of a device?

Explanation: The subnet mask depicts the portion of the IP address that indicates the network from the portion of the address that indicates the host address on the network.

Which IP address is a Class C address quizlet?

The IP address range for Class C is 192.0. 0.0 to 223.255. 255.255.

Is 255.255 255.255 IP address valid?

In general, using 255.255. 255.255 is a bad idea, as there are several setups where the interface with the default route is exactly the wrong choice. Selecting an interface explicitly is better, but needs to be done carefully.

What is the 0.0 0.0 IP address?

In the Internet Protocol Version 4, the address 0.0. 0.0 is a non-routable meta-address used to designate an invalid, unknown or non-applicable target. This address is assigned specific meanings in a number of contexts, such as on clients or on servers.

How can you tell if an IP address is valid or invalid?

An IP address is considered valid or invalid based on the subnet mask of the network. A network contains a network ID, the usable(host) IP range and a broadcast ID. The Network ID and Broadcast ID cannot be used and this network ID and Broadcast IDs are determined by its subnet mask.

Why do I have 4 IP addresses?

It may have taken a little bit longer than 10 years, but the prediction was not far off. Many people walk around today with three or more IP addresses on their person. Your laptop computer, smartphone, tablet and eReader all have IP addresses if they connect to the Internet, so that’s four addresses right there.

See also  How do I find my IP address in Terminal?

What are the types of IP address?

An internet protocol (IP) address allows computers to send and receive information. There are four types of IP addresses: public, private, static, and dynamic.

What are the three parts of an IP address?

  1. Network part: • Network part is the unique address for the host’s network on internet.
  2. Subnet part(optional): •
  3. Host part: •

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks