What is the size of host bits in class b of ip address?

A class B network number uses 16 bits for the network number and 16 bits for host numbers.

Considering this, how many network bits and host bits are there in Class B? Class B networks have 14 bits for the Network ID (Bits 15, 16 are set and can’t be changed) and 16 bits for the Host ID, that means you can have up to ‘2 to the power of 14’ = 16,384 Networks and ‘2 to the power of 16′ = 65,536 Hosts in each Network, of which 2 cannot be used because one is the Network Address and the

Also, what is the size of network bits and host bits of Class A IP address? Class A addresses: The first 8 bits of the IP address are used for the network ID. The final 24 bits are used for the host ID. Class B addresses: The first 16 bits of the IP address are used for the network ID. The final 16 bits are for the host ID.

As many you asked, how many bits are in the host part of an IP address? IP addresses: Networks and hosts. An IP address is a 32-bit number. It uniquely identifies a host (computer or other device, such as a printer or router) on a TCP/IP network. IP addresses are normally expressed in dotted-decimal format, with four numbers separated by periods, such as 192.168.

Amazingly, how do you calculate the number of hosts in Class B? All hosts need a network address and a broadcast address. The network and broadcast addresses are indicated by either all 1s or all 0s in the host information part of an IP address. With those two addresses always reserved, the total number of assignable hosts for a class B network is 216 – 2 = 65,534.A class B network number uses 16 bits for the network number and 16 bits for host numbers.

What is the size of network bits?

As all IPv4 networks have 32 bits, and each “section” of the address denoted by the decimal points contains eight bits, “192.0. 2.0/24” leaves eight bits to contain host addresses.

What is host bits and network bit?

An IP address is 32 bits long and made up of two components, a network portion and a host portion. The network address is used to identify the network and is common to all the devices attached to the network. The host (or node) address is used to identify a particular device attached to the network.

What is the size of the host ID in Class C?

Class C: IP address belonging to class C are assigned to small-sized networks. The network ID is 24 bits long. The host ID is 8 bits long.

What is the size of MAC address?

Historically, MAC addresses are 48 bits long. They have two halves: the first 24 bits form the Organizationally Unique Identifier (OUI) and the last 24 bits form a serial number (formally called an extension identifier).

How many bits is a host?

There are 16 host bits because, when you convert 255.255. 0.0 to binary, there are 16 binary 0s—the last 16 bits in the mask.

What is a host bit?

Host bits are the portion of an IP address that identify a specific host in a subnet. The subnet mask determines how much of the address is used for network bits and host bits.

What is host number?

A host (also known as “network host”) is a computer or other device that communicates with other hosts on a network. … On a TCP/IP network, each host has a host number that, together with a network identity, forms its own unique IP address.

How do you calculate the number of hosts in Class A?

To find the maximum number of hosts, look at the number of binary bits in the host number above. The easiest way to do this is to subtract the netmask length from 32 (number of bits in an IPv4 address). This gives you the number of host bits in the address.

What is the maximum number of hosts per subnet?

The maximum number of available hosts is 4094. You cannot, of course, use the first or last IP in a subnet (e.g. 10.0. 0.0 and 10.0. 15.255) for hosts as these are required for other purposes.

What is host ID in IP address?

The Host ID is the portion of an IP address that uniquely identifies a host on a given TCP/IP network. You find the host ID by logically NANDing the binary form of the IP address with the binary form of the subnet mask for the network. … 0.0 (the default subnet mask), the host ID is 0.0.

What is the size of an IP address Mcq?

Explanation: The format of an IP address is a 32-bit numeric address written as four numbers separated by periods. Each number can be zero to 255. For example, 1.160. 10.240 could be an IP address.

What is the size of source and destination IP address in IP header?

The header is 24 bytes long and contains 15 fields, including 4 bytes for source IP address and 4 bytes for destination IP address.

Which of the following is a Class B host address?

Class B Address Class B IP Addresses range from 128.0. x.x to 191.255. x.x. The default subnet mask for Class B is 255.255.