Quick answer: How to assign ip address to apc pdu?

By default, the APC AP7900 does not have an IP address assigned. The easiest way to configure an IP address is to log into the PDU over a serial port. Most servers still come with a built-in 9-pin serial port, but most desktops and laptops do not. If you don’t have one, many vendors sell USB to serial adapters.

Correspondingly, how do I change the IP address for APC UPS?

Subsequently, how do I find my PDU IP address? For PDUs with a display screen: Press and hold the select button for a few seconds. Once “IP” appears on the display screen, release the button. Your unit will then display the IP address in a sequence of four groups.

Furthermore, how do you manage APC PDU?

  1. Log into the DCE client and navigate to the Monitoring perspective and Device View pane.
  2. Right-click on the Switched Rack PDU and select Outlet Control.
  3. Select the checkboxes for the outlets that you would like to control.
  4. Select the command to perform for the selected outlets.
See also  How to check own ip address?

Considering this, how do I find my APC UPS IP address? Start the Network Management Card Device IP Configuration Utility. Enter the full IP address range of your network and click on the button to start the search for the UPS. The system will automatically locate the IP address of your APC UPS.The default IP address is 192.168. 2.66 with a subnet mask of 255.255. 255.0.

What is the default IP address for APC Network Management Card?

By default, the APC AP9630 NMC (Network Management Card) does not have an IP address assigned. The easiest way to configure an IP address is to log into the UPS’s NMC over a serial port. Many servers still come with a built-in 9-pin serial port, but most desktops and laptops do not.

How do you connect PDU?

  1. Connect a crossover patch cable from the system to the PDU metering unit’s RJ-45 Ethernet port.
  2. Connect the PDU power input lead to the AC power source.
  3. On the system, use a web browser to log in to the PDU metering unit.

How do you console a PDU?

How do I reset APC Switched Rack PDU?

  1. Press and hold the reset button for about 10 seconds.
  2. The status light should blink rapidly.
  3. Release the reset button then press it again for about a second.
  4. The light should go orange.
  5. After about 20 seconds the reset will complete and the device will have booted.

How do I reset my APC 7900?

  1. Press the reset button for 10 seconds.
  2. The light might start pulsing or go out.
  3. Release the reset button and press it again for 1 second.
  4. The light should pulse / go orange.
  5. After a short while (10-20s), the reset will be complete.
  6. Now you can login as apc/apc.
See also  Frequent answer: How do i find information on an ip address?

How do I access APC PDU?

A Device User can also access the event log in the control console by pressing CTRL+L. The default user name is device, and the default password is apc.

How do I network APC UPS?

  1. Apply the port settings to establish the connection.
  2. Press enter 3-5 times to display the username prompt.
  3. Use the default username and password of “apc”.

How do I connect APC to computer?

What is the default login for APC UPS?

The default user name is device, and the default password is apc.

How do I remotely monitor APC UPS?

How do I connect to APC Smart UPS 1500?

What is NMS IP address?

NMS, IPv4 Address/Name—The IPv4 IP address, DNS hostname, or subnet of the network management system (NMS), or the set of machines that can execute get and set requests to the managed devices.

How do I reset my APC Network Management Card?

1.) Hold down the Reset button for 20-25 seconds, ensuring the Status LED is pulsing green during this time. 2.) When the Status LED change to amber or orange, release the Reset button to allow the NMC to complete its reboot process.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks