Question: Can you have a class a ip address with a class c subnet mask?

Yes. The IP Addresses from 192. x.x.x to 223. x.x.x can have a /16 prefix (255.255.

You asked, can you subnet Class A? Class A networks use a default subnet mask of 255.0. 0.0 and have 0-127 as their first octet. The address 10.52. 36.11 is a class A address.

Frequent question, can you subnet a Class C network? A class C network would have a subnet mask of 255.255. 255.0 which means that 24 bits are used for the network. In CIDR notation this is designated by a /24 following the IP address.

As many you asked, what is the default subnet masks of class A and class C networks? The three default subnet masks are 255.0. 0.0 for Class A, 255.255. 0.0 for class B, and 255.255. 255.0 for Class C.

Additionally, which address class does not need subnet mask? 0.0 to 255.255. 255.255. Just like our Class D multicast addresses, these addresses do not have a default subnet mask.You can determine the number and type of IP addresses any given local network requires based on its default subnet mask. An example of Class A IP address and subnet mask would be the Class A default submask of 255.0. 0.0 and an IP address of 10.20. 12.2.

See also  How to change ip address on intermec px4i?

How many IP addresses does a Class C network have?

A Class C address consists of a 24-bit network address and an 8-bit local host address. The first three bits in the network address indicate the network class, leaving 21 bits for the actual network address. Therefore, there are 2,097,152 possible network addresses and 256 possible local host addresses.

Which of the following is a valid Class C IP address?

The correct answer is 192.168. 5.54. Class C IP addresses range from 192.0. 0.0 to 223.255.

What is the natural mask for Class C?

The natural mask for a Class C address is 255.255. 255.000 which provides for up to 254 host addresses.

How do you create a subnet for a Class C?

How do you know if a subnet mask is valid?

Subnets, hosts and broadcast addresses per subnet: To find the valid subnets for this specific subnet mask you have to subtract 248 from the value 256 (256-248=8), which is the first available subnet address.

How do I know if my IP is Class AB or C?

  1. If it begins with 0, then it’s a Class A network.
  2. If it begins with 10, then it’s a Class B network.
  3. If it begins with 110, then it’s a Class C network.
  4. If it begins with 1110, then it’s a Class D network.
  5. If it begins with 1111, then it’s a Class E network.

What is class A IP address?

Class A IP addresses are used for huge networks, like those deployed by Internet Service Providers (ISPs). Class A IP addresses support up to 16 million hosts (hosts are devices that connect to a network (computers, servers, switches, routers, printers…etc.)

See also  You asked: How to unblock ip address on iphone zoom?

How many IP addresses does a Class C network have quizlet?

There are 2,097,152 Class C network IDs. Each class C address gives you 254 hosts per network.

How do you write an IP address using a subnet mask?

What does class C network mean?

A Class C network is any network in the 32-bit, IPv4 addressing scheme whose first three bits, the so-called high-order bits, are 110. IPv4 (Internet protocol version four) is the current mainstream addressing protocol for the Internet and other TCP/IP (transmission control protocol/Internet protocol) networks.

What is my public IP address subnet mask and default gateway?

Use the IPCONFIG Command Type “ipconfig” at the prompt and press “Enter.” This command displays all network interfaces and their configurations, including IP addresses, subnet masks and default gateway.

How many subnets can a Class C network have?

Class C /31 borrows 7 bits for the network address from the host address. That gives us 128 subnets, which is 2 to the power of 7. /31 can accommodate two hosts each.

How do you subnet an IP address from a class?

  1. Subnet: 10.0. 0.0.
  2. Broadcast: 10.0. 127.255.
  3. Valid host range: 10.0. 0.1 through 10.0. 127.254.

What are Class C IP addresses used for?

Class C Public & Private IP Address Range Class C addresses are used in small local area networks (LANs). Class C allows for approximately 2 million networks by using the first three octets for the network ID. In a class C IP address, the first three bits of the first octet are always 1 1 0.

What is private Class C IP?

See also  How to trace ip address using phone number?

Class C: 192.168. 0.0 to 192.168. 255.255.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks