Best answer: Which of the following is the distance vector routing protocol used on the internet?

RIP (Routing Information Protocol) is a distance vector routing protocol that uses hop count as its metric.

People ask also, what are the most common distance vector routing protocols? Routing Information Protocol (RIP) and Interior Gateway Routing Protocol (IGRP) are two very popular Distance Vector routing protocols.

Likewise, what routing protocol is usually used on the Internet? The routing protocol, which is currently in use, is Transmission Control Protocol/Internet Protocol (TCP/IP), which is providing to be a great success for transmission of data. TCP provides a reliable connection for the transfer of data between applications.

Best answer for this question, which of the following is a distance vector routing protocol quizlet? EIGRP/BGP; RIP and RIPv2 are distance vector routing protocols. OSPF and IS-IS are link state routing protocols. EIGRP uses qualities from both distance vector and link state to create a hybrid routing protocol. BGP can be used as an EGP and IGP, and hence can be considered as a hybrid routing protocol.

Also the question is, which of the following routing protocols is used by routers on the Internet for learning? Which of the following routing protocols is used by routers on the internet for learning and sharing routes? (BGP (border gateway protocol) is the protocol used on the internet. ISPs use BGP to identify routes between ASs.Example – Consider 3-routers X, Y and Z as shown in figure. Each router have their routing table. … Consider router X , X will share it routing table to neighbors and neighbors will share it routing table to it to X and distance from node X to destination will be calculated using bellmen- ford equation.

See also  How do you get internet while traveling in an rv?

How does a distance vector routing protocol work?

Distance-vector routing protocols measure the distance by the number of routers a packet has to pass, one router counts as one hop. … The distance vector algorithm was the original ARPANET routing algorithm and was implemented more widely in local area networks with the Routing Information Protocol (RIP).

Which of the following dynamic routing protocols are distance vector routing protocols?

Examples of distance vector protocols include RIP – Routing Information Protocol and IGRP – Interior Gateway Routing Protocol. If you’re interested in finding out more information on RIP, check out my articles on how to configure Routing Information Protocol RIPv1 and RIPv2.

Why routing protocols are used?

A routed protocol is used to deliver application traffic. It provides appropriate addressing information in its internet layer or network layer to allow a packet to be forwarded from one network to another. Examples of routed protocols are the Internet Protocol (IP) and Internetwork Packet Exchange (IPX).

Which routing protocol is best and why?

EIGRP is a popular choice for routing within campus networks both big and small. Many network engineers believe that EIGRP is the best choice for a routing protocol on private networks because it offers the best balance between speed, scalability and ease of management.

Which of the following protocols are not distance vector routing protocol?

OSPF is not a distance-vector protocol like RIP, but a link-state protocol with a set of metrics that can be used to reflect much more about a network than just the number of routers encountered between source and destination. In OSPF, a router attempts to route based on the “state of the links.”

See also  Question: How much does hughesnet internet cost?

Which ipv6 routing protocol uses UDP port 521?

RIPng is a UDP-based protocol and uses UDP port 521.

Which routing protocols have an administrative distance of 120 quizlet?

EIGRP has an administrative distance of 90, and RIP has an administrative distance of 120, by default.) 16. If your routing table has a static, an RIP, and an EIGRP route to the same network, which route will be used to route packets by default?

Which one of the following is a distance vector protocol?

Distance vector routing protocols include the following: Routing Information Protocol (RIP) for IP. Xerox Networking System’s XNS RIP. Novell’s IPX RIP.

What is IGP routing protocol?

An interior gateway protocol (IGP) is a dynamic route update protocol used between routers that run on TCP/IP hosts within a single autonomous system. The routers use this protocol to exchange information about IP routes.

Is Eigrp a nonproprietary routing protocol?

True/False: EIGRP is a nonproprietary routing protocol. False. EIGRP is a Cisco-proprietary routing protocol.

Is EIGRP a distance vector protocol?

EIGRP is an enhanced distance vector protocol that evolved from Cisco’s IGRP. Although IGRP is now obsolete, a network that still uses routers based on the protocol can interoperate with EIGRP-based routers because the metrics used with one protocol can be translated into the metrics of the other protocol.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks